Download
Contact Us
Telephone:+860755-89505873Fax:+860755-89504913
After-sales department:
+860755-89505873-8030 Ms Leung
- 413958458
- 13926598885
User Manual of Plain EyeglassesCamera
Source:未知
Writer:admin
Time:2012-10-09 18:00:35
Click:Loading...
User Manual of Plain EyeglassesCamera
l Product Accessories
● Eyeglasses camera ● USB cable ● User manual CD
● A clip ● Glasses bag and cloth ●Charger
l Picture & Button
1.Camera 2.Indicator light 3. Power on/off /Function Button
4. USB port 5. MIC 6. Reset
l Technical Data
1) Main functions: recording video and audio at the same time, taking photo, recording audio alone, USB drive, and glasses
2) Small in shape, wide use range and deep elusive
3) Video format: AVI, 640*480
4) Photo format: JPEG, 4032*3024
5) Sound recording format: WAV
6) Internal memory: 2GB/4GB/8GB
7) USB: 2.0 (Hs)
8) Charging time: 3-4hours
9) Battery use time: Polymer Li battery. can work 3.5 hours continually
10) Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/ Vista or above (windows98 is excepted)
l Operation
u Switch on
Long press Power on/off /Function Button, indicator light(blue light) keeps on, system was initialized. When blue light turns off and green light flashes, the camera enter into Video recording; Shortly press Power on/off /Function Button, green light will turn off and blue light turns on, which shows video recording stops, the file was saved and back to standby mode.
Attention: 1.Under constantly video recording, to make sure the file’s security, system will save each file every 60 mins automatically.
2.When the internal memory is full, the equipment will save the file and switch off ,after blue light flashing 10 secs.
u Recording audio alone
Under the video recorder mode, constantly shortly press Power on/off /Function Button twice, blue light will flash slowly, and the camera enters into audio recording mode; Press the Power on/off /Function Button again, the blue light will keep on, stop recording ,save the file and back to standby mode.
u Taking Photo
Under standby mode, press Photo/Record/Save Button once, the indicator light( blue light ) flashes 1 times , indicate one photo was taken and saved and the device comes into photo standby mode.
u Recording video and audio
Under standby mode, constantly press Power on/off /Function Button three times, the indicator light(blue light and green light) twinkles in turn .It enters into photo taken mode. Shortly press Power on/off /Function Button, blue light flash 9 times quickly, which shows two photo was taken at a time and was saved ,and back to standby
7) USB: 2.0 (Hs)
8) Charging time: 3-4hours
9) Battery use time: Polymer Li battery. can work 3.5 hours continually
10) Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/ Vista or above (windows98 is excepted)
l Operation
u Switch on
Long press Power on/off /Function Button, indicator light(blue light) keeps on, system was initialized. When blue light turns off and green light flashes, the camera enter into Video recording; Shortly press Power on/off /Function Button, green light will turn off and blue light turns on, which shows video recording stops, the file was saved and back to standby mode.
Attention: 1.Under constantly video recording, to make sure the file’s security, system will save each file every 60 mins automatically.
2.When the internal memory is full, the equipment will save the file and switch off ,after blue light flashing 10 secs.
u Recording audio alone
Under the video recorder mode, constantly shortly press Power on/off /Function Button twice, blue light will flash slowly, and the camera enters into audio recording mode; Press the Power on/off /Function Button again, the blue light will keep on, stop recording ,save the file and back to standby mode.
u Taking Photo
Under standby mode, press Photo/Record/Save Button once, the indicator light( blue light ) flashes 1 times , indicate one photo was taken and saved and the device comes into photo standby mode.
u Recording video and audio
Under standby mode, constantly press Power on/off /Function Button three times, the indicator light(blue light and green light) twinkles in turn .It enters into photo taken mode. Shortly press Power on/off /Function Button, blue light flash 9 times quickly, which shows two photo was taken at a time and was saved ,and back to standby
mode. Now two lights will flash in turn; Constantly press Power on/off /Function Button three times again, blue light keeps on and back to standby mode.
u Power off
Under standby modes, long press Power on/off /Function Button for some seconds, green indicator quickly flashes 5 times and turns off, indicating the device is off ;Press the reset button lightly by the clip, the power indicator turns off , indicating the device is off .
1) When the power is not enough, the device will turn off and save the files automatically with blue light constantly twinkling for several secs.
2) When memory is full, the device will turn off and save the files automatically with blue light constantly twinkling for 10 secs.
3) Under the standby mode, the device will turn off automatically to save power with no operation in 3 mins.
u Reset
Insert the pin into the RESET hole to restart the device once it does not work normally under incorrect operations.
Attention: While resetting, please control your strength, gently operate tin slip, in order not to destroy the equipment.
u Charging
Charge the battery under power-off mode or standby mode connecting computer by USB cable. While charging, the blue light is flashing. Green light keeps on once it is fully charged.
u Playback video
After video recording , connect the camera to your computer via USB cable to play back video under power off condition. Make sure play back software installed before connect to computer.
u Setting time
The software adds a function of time display on top left corner of the video file, the method as follows:
1) Connect the camera to computer via USB cable;
2) Creat a file named SetTime.TXT according to the format:
u Power off
Under standby modes, long press Power on/off /Function Button for some seconds, green indicator quickly flashes 5 times and turns off, indicating the device is off ;Press the reset button lightly by the clip, the power indicator turns off , indicating the device is off .
1) When the power is not enough, the device will turn off and save the files automatically with blue light constantly twinkling for several secs.
2) When memory is full, the device will turn off and save the files automatically with blue light constantly twinkling for 10 secs.
3) Under the standby mode, the device will turn off automatically to save power with no operation in 3 mins.
u Reset
Insert the pin into the RESET hole to restart the device once it does not work normally under incorrect operations.
Attention: While resetting, please control your strength, gently operate tin slip, in order not to destroy the equipment.
u Charging
Charge the battery under power-off mode or standby mode connecting computer by USB cable. While charging, the blue light is flashing. Green light keeps on once it is fully charged.
u Playback video
After video recording , connect the camera to your computer via USB cable to play back video under power off condition. Make sure play back software installed before connect to computer.
u Setting time
The software adds a function of time display on top left corner of the video file, the method as follows:
1) Connect the camera to computer via USB cable;
2) Creat a file named SetTime.TXT according to the format:
The first line:[ date ]; the second line:2010/12/12; the third line: 12:12:12;
3) The time of camera will be updated when you pull it out and restart it again.
l Attention
1) The camera will power off automatically within 3 minutes without any operation.
2) The system will save the video file firstly then turn off if low of power when taking video.
3) Keep a proper distance and DV Vertical with good ample lighting while recording to ensure a good shooting image.
4) The time of PC recognizing the device is different according to its different system and configuration, so please not operate during recognizing. If the device can’t be recognized, please check your computer’s operation system, device drivers, USB port and the USB cable is normal, and then connect the hardware again.
5) The device built-in high capacity polymer lithium-ion battery, no remember function, can be rechargeable. In the first 5 usages, please charge it fully when it is power off. Then can activate the max capacity and get the standard time.
- Previous: No more
- Next: No more
