l  Product Accessories
●  MP3 watch camera            ●  Earphone           ●  USB cable   ●  User manual CD
l  Picture & Buttons
 
1. Camera       2. Indicator Light        3. Time adjustment Key         4. MIC.
5. Photo/Prev/Volum decrease                  6. Earphone/USB port  
7. Power on/off/Video/Next/Volume increase
l  Technical Data
1)  Main function: Record video and audio at the same time, taking photo, MP3 player, watch, USB drive
2)  Video format: AVI, 640*480 resolution
3)  Picture format: JPEG, 280*1024 resolution
4)  Internal memory: 2GB/4GB/8GB/16GB/32GB
5)  USB interface: 2.0（Hs）
6)  Charging time: 2-3 hours
7 )  Battery use time: built-in Li battery, 1.5 hours
8)  Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/vista or above (Windows98 is excepted).
l  Operation
u  Switch on
Press the Power on/off button for some seconds, red light will flash once, indicating the watch enters into standby mode.
Attention: to save power, the device will power off automatically if no any operation within 1 minute under standby mode.
u  MP3 player
Store mp3 songs in the root disk of the watch camera, under standby mode, you can listen to mp3 player with earphone. When songs play, red light flashes. Press next/volume increase button or prev/volume decrease button to adjust the mp3 player. If you want to stop mp3 player, just pull the earphone out, red light keeps on, it backs to standby mode.
u  Recording video and audio
Under standby mode, Press the Power on/off/Record button once, red light will turn off, it starts recording. Short press the same button again, red light keeps on, the video is saved and the device turns to standby mode.
u  Taking photo
Press the Photo/ button once, red light flashes once, indicating that a photo is taken and saved automatically, then the watch back into standby mode again.
 
u  Playback video
Connect the device to computer via USB cable and play back video on computer. Please make sure there is the playback software in the computer before connecting.
u  Date & time setting
1)     Connect the device with computer.
2)     Create a txt file named “ time ”, edit the date and time as: 2012.12.12 12:12:12.
3)     Copy the file into the root disk of the device.
4)     Pull the device out from computer.
5)     When restart the device, the date and time is reset already.
u  Switch off
Under any mode, long press the power on/off button to switch off.
With this method, the device will save files first then power off.
u  Reset  
When the device does not work normally, press the video button and photo button at the same time to reset, the device will switch off.
Reset when recording, the files will not be saved.
u  Charging
Under power off mode, connect the camera to computer via USB cable and charge it. The red light keeps flashing while being charged. When the red light keeps on, it shows the camera is fully charged.
If the device if of low electricity, the device will save the file and turn off automatically.
 
 
 
l  Attention
1)    You can check whether the device is fully charged while you can’t turn it on.
2)    When taking video continually, the system will automatically generate a new video    file after each operation.         
3)    In the adequate light environment, keep the DV vertical and stable, you can get best video and images within a certain distance.
4)    Connect to computer:
The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable in good work order. Then connect again.
5) The device has a function of memorize by using built-in high-capacity polymer lithium battery. Please charge the battery fully after you have used out the battery. By doing so, you can access the maximum capacity of the battery, reaching the standard working hours
6) The device is high-Tec electronic product; please do not use it under high impulsive force and shaking or in a strong magnetic field and weak electric field area