Download
Contact Us
Telephone:+860755-89505873Fax:+860755-89504913
After-sales department:
+860755-89505873-8030 Ms Leung
- 413958458
- 13926598885
Users Manual
User Manual of Car Key Camera
Source:未知
Writer:admin
Time:2012-10-09 18:21:25
Click:Loading...
User Manual of Car Key Camera
l Product Accessories
● Car key camera ● USB cable ● User manual CD ● A clip ● Charger
l Picture & Buttons
1. Power on/off 2. Record/photo/save 3. Mic 4. Camera5.Light 6. USB port 7. Reset 8.SD Card Camera
l Technical Data
1) Functions: taking photo, video and audio, USB drive
2) Tiny dimension, various usage
3) Video: AVI,720*480 resolution
4) Photo: JPEG, 1280*1024 resolution
5) SD card Memory: 1GB-8GB
6) USB: 2.0（Hs）
7) Charging time: 2-3 hours
8) Battery use time: built-in Li battery, 1-2 hours
9) Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/ Vista or above (windows98 is excepted)
l Operation
u Switch on
Press on/off button for some seconds until the orange light is on.
u Recording video and audio
1) Press the record/photo button for some seconds, the yellow light will flash 3 times, and then it turns off, the camera starts to record video and audio.
2) Press the record/ photos button again, the yellow light turns on, it stops recording and save the data, the camera back to standby mode.
u Taking photo
Understand standby mode, press record/ photo button one time shortly, the yel low light flash one time then off, indicating one photo is taken, then the camera back to standby mode again.
u Switch off
Under standby mode or recording mode, press the power off button for some seconds.
At any mode, insert a pin into the RESET hole, the device will power off also, but the file will not saved
Attention: while recording, the system will save the video file firstly then turn off if presses the power on/off for some seconds.
u Reset
Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, and then the device is at power off mode.
u Charging
l Under power off or standby mode, connect the camera to computer via USB cable and charge it. The yellow light keeps on while being charged. The charging time is 2 to 3 hours.
l Under power off mode,connect the device to charger via USB cable under power off mode, the green light of the charger keeps on while being charged. The green light turns off when it is fully charged.
u Playback
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is a player in the computer before connecting.
u Switch on
Press on/off button for some seconds until the orange light is on.
u Recording video and audio
1) Press the record/photo button for some seconds, the yellow light will flash 3 times, and then it turns off, the camera starts to record video and audio.
2) Press the record/ photos button again, the yellow light turns on, it stops recording and save the data, the camera back to standby mode.
u Taking photo
Understand standby mode, press record/ photo button one time shortly, the yel low light flash one time then off, indicating one photo is taken, then the camera back to standby mode again.
u Switch off
Under standby mode or recording mode, press the power off button for some seconds.
At any mode, insert a pin into the RESET hole, the device will power off also, but the file will not saved
Attention: while recording, the system will save the video file firstly then turn off if presses the power on/off for some seconds.
u Reset
Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, and then the device is at power off mode.
u Charging
l Under power off or standby mode, connect the camera to computer via USB cable and charge it. The yellow light keeps on while being charged. The charging time is 2 to 3 hours.
l Under power off mode,connect the device to charger via USB cable under power off mode, the green light of the charger keeps on while being charged. The green light turns off when it is fully charged.
u Playback
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is a player in the computer before connecting.
u Setting time
When using the device for the first time or the time error, you can reset the time through the following method:
1) Connect the camera to computer via USB cable
2) Create a file named”TAG.txt” follow the format: The first line: [date]
The second line: 2009/12/12
The third line: 12:12:12.
3) Copy the file into root disk of the camera, the time of camera will be updated when you pull it out and restart it again.
l Attention
1) When the device is lack of battery when taking video, the system will save the video data first, and then shut down automatically.
2) When taking video continually, the system will automatically generate a new
video file after each operation.
3) As the device has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.
- Previous: User Manual of All-in-one Video Glasses
- Next: User Manual of Car Key Camera
