l  Product Accessories
●   Bag camera       ●   Remote control       ●   User manual CD        
l  Picture & Buttons
 
1. Power on/off (left: off/right: on)     2. USB Port     3. Record/Save    
4. Remote control    5. Indicator Light    6. Camera
l  Technical Data
1)     Main function: recording video and audio at the same time, Handbag, USB drive.
2)     Video format: AVI, 720*480 resolution
3)     Internal Memory: 2GB/4GB/8GB
4)     USB interface: 2.0（Hs）
5)     Charging time: 7-8 hours
6)     Battery use time: built-in Li battery, can work continually about 12 hours
7)     Quicktime player, KMPlayer, Mplayer
8)     Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ VISTA or above (Windows98 is excepted)
9)     Various usages: USB drive, business, education, security, media, police, travel, entertainment, etc.
l  Operation
u  Switch on
After opening the zip of the bag, switch the power to the “on” position and it comes into standby mode. Then zip back.
u  Recording video and audio by Remote Control
1)    Under standby mode, press the remote control for several seconds, the green light keeps on, two seconds later the green light flash 2 times then turns off, it starts to record.
2)    Press the remote control once, the green light flash one time then turns off, the video file is saved and the camera turns back to standy mode.
u  Recording video and audio by Manual
1)    Under standby mode, press the Record/save button for several seconds, the green light keeps on, two seconds later the green light flash 2 times then turns off, It starts to record.
2)    Press the Record/save button once again, the green light flash one time then  turns off, The video file is saved and the camera turns back to standy mode.
Attention:
The device save video clips every 30 minutes until the memory is full, it will not delete the previous recorded video automatically.
u  Switch off
1.      Push power on/off button to “off ” under standby mode or recording mode, all lights turn off and the device will stop working.
2.      Press the remote control for several seconds under recording mode to power off.
Attention:
1.      Under recording mode, the file cannot be saved if turning off the camera directly.
2.      To save the time set for the video, just power off by pressing the remote control, if by switching the power off button, the time of the video cannot be saved, and it will back to the Default time.
 
u  Charging
Connect the device to computer via USB cable under power off or standby mode, the green light flash slowly while being charged. The green light keeps on when it is fully charged. When it’ s of low electricity, the green light flash regularly.
Attention: The device has a function of memorize by using built-in high-capacity polymer lithium battery. In the first 5 times please charge the battery fully after you have used out the battery. By doing so, you can access the maximum capacity of the battery, reaching the standard working hours.
u  Playback video
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is playback software in the computer before connecting.
u  Setting time
When using the device for the first time, you can reset the time as follows:
1)     Switch the poweron/off button to the “on” position and Connect the camera to computer,
2)     Create a txt file named “TAG. Txt”
3)     Edit the file according to the format:
The first line: [date]
The second line: 2010/12/12
The third line: 12:12:12
Eg.
[date]
2010/12/12
12:12:12
4)     Copy the file to the root of the disk of the camera
5)     The time will be reset when restart the camera again next time.
Attention:
To save the time set for the video, just power off by pressing the remote control, if by switching the power off button, the time of the video cannot be saved, and it will back to the Default time.
l  Attention
1)     If it’s lack of electricity while recording, the file will be saved before the device turns off.
2)     When taking video continually, the system will automatically generate a new video file after each operation.      
3)     Under a bright environment, keep camera vertical, stable and keep certain distance from the scene you want to record in order to achieve a best effect .
4)     Connect to computer: the time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable in good work order, then connect again.