l  Product Accessories
l  Hat camera   ●   Remote control      ● User manual CD  
l  Picture & Buttons

1、Power on/off        2、Record/Saved    3、Indicator Light
 4、Remote Control      5、Camera         6、USB Port
 
l  Technical Data
This device is built-in memory, can be used by remote control, can record video and audio as a digital camera, it is very simple to operate it, and have good concealment; Indoor under low light can also take satisfactory effect, it also can be used as USB drive directly.
1)     Main function: recording video and audio by manual & by remote control, Hat, USB drive.
2)     Video format: AVI, 720*480
3)     Internal Memory: 2GB\4GB\8GB
4)     USB: 2.0（Hs）
5)     Charging time: 4-5 hours
6)     Using time: Built-in Li battery, Continuous working about 2-3 hours.
7)     Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ VISTA or above (Wndows98 is excepted)
 
l   Operation
u Switch On
Before using it, please press the Power on/off button to “on” position, it comes to standby mode.
Attention: In order to save power, please press the power on/off button to “off” position if don’t use it.
u  Record video and audio by remote control
Under standby mode, long press the remote control, the device will long vibrate once, green light turns on, after 2 seconds green light flashes 2 times then turns off, indicating it comes to recording mode; press remote control again, the device will vibrate 3 times, green light flashes once time then turns off, the video file is saved then the device turns back to standby mode.
Attention: the device saves video files automatically every 30 minutes. When the memory is full, it will save files automatically and turn off, then we cannot do any operation.
 
u  Recording video and audio by manual
Under standby mode, press Record/Save button, the device will long vibrate once time, green light turns on, after 2 seconds green light flashes 2 times then turn off, indicating it comes to recording mode; Shortly press Record/Save button once, the device vibrates for 3 times, green light flashes once time then turns off, the video file is saved then the device turns back to standby mode.
Attention: the device saves video files automatically every 30 minutes. When the memory is full, it will save files automatically and turn off, then we cannot do any operation.
u  Power Off
Push power on/off button to “off ” under standby mode or recording mode, and Under recording mode, you also can press remote control button or Record/save button to power off
Attention: Under recording mode, the file cannot be saved if turning off the camera directly.
u  Charging
Under standby mode, connect the device to computer via USB cable, the green light flash slowly while being charged. The green light keeps on when it is fully charged. When it’s of low power, the green light will flash regularly.
Attention: The device has a function of memorize by using built-in high-capacity polymer lithium battery. In the first 5 times please charge the battery fully after you have used out the battery. By doing so, you can access the maximum capacity of the battery, reaching the standard working hours.
u  Playback
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is playback software in the computer before connecting.
u  Setting time
When using the device for the first time, you can reset the time as follows:
1)     Create a txt file named “TAG. Txt”
2)     Edit the file according to the format:
E.g.:
The first line: [date]
The second line: 2010/12/12
The third line: 12:12:12
3)     Copy the file to the root of the disk of the camera, then pull the camera out of computer
4)     The time will be reset when restart the camera again next time.
Attention:
To save the time set for the video, just power off by pressing the remote control, if by switching the power off button, the time of the video cannot be saved, and it will back to the Default time.
 
l  Attention
1.    If it’s lack of power while recording, the file will be saved before the device turns off.
2.    When taking video continually, the system will automatically recreate a new video file after each operation. 
3.    Under a bright environment, keep camera vertical, stable and keep certain distance from the scene you want to record in order to achieve a best effect .
4.    Connect to computer: the time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable in good work order, then connect again.