Download
Contact Us
Telephone:+860755-89505873Fax:+860755-89504913
After-sales department:
+860755-89505873-8030 Ms Leung
- 413958458
- 13926598885
Users Manual
User Manual of Hat Camera
Source:未知
Writer:admin
Time:2012-10-10 10:47:32
Click:Loading...
User Manual of Hat Camera
l Product Accessories
l Hat camera ● Remote control ● User manual CD
l Picture & Buttons
1. Power on/off 2. Indicator light 3. Camera 4. MIC
5. Record/Saved/photo 6. Remote Control 7. USB Port
l Technical Data
This device is built-in memory, can be used by remote control, can record video and audio as a digital camera, it is very simple to operate it, and have good concealment.
1) Main function: recording video and audio by manual & by remote control, Hat, Taking Photo, USB drive.
2) Video format: AVI, 640*480 resolution.
3) Photo format: JPEG, 1280*960 resolution.
4) Internal Memory: 2GB\4GB\8GB
5) USB: 2.0（Hs）
6) Charging time: 4-5 hours
7) Using time: Built-in Li battery, Continuous working about 2-3 hours.
8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ VISTA or above (Wndows98 is excepted)
l Operation
u Switch On
Before using it, please press the Power on/off button to “on” position, long press the remote control power on /off button ,the device vibrate for a long time once ,and the yellow light turns on ,it comes to standby mode.
Attention: under standby mode, if there is no operation within 1 minute, the device will turn off after long vibrate twice. In order to save power, please press the power on/off button to “off” position if don’t use it.
u Photo
Under standby mode, shortly press the Record/photo/save button, the device will shortly vibrate one time, and the yellow light blinks one time indicating one photo was taken and saved automatically. Then device comes back into standby mode.
u Recording video and audio
Under standby mode, long press Record/Save/photo button, the device will short vibrate twice, yellow light turns off after blinks 3 times, indicating it comes to recording mode; Shortly press Record/Save button once, the device vibrates for 3 times, yellow light keeps on, the video file is saved then the device turns back to standby mode.
u Power Off
Under standby mode, long press power on /off button, after long vibrate 2 times, the indicator light will turn off and then the device will turn off.
Push power on/off button to “off” position under standby mode or recording mode.
Attention: Under recording mode, the file cannot be saved if turns off the camera directly. Long press the remote control power on /off button the device will save the file first and then turns off.
u Charging
Under standby mode, connect the device to computer via USB cable, the yellow light keeps on while being charged. The yellow light turns off when it is fully charged. When it’s fully charged, the device will long vibrate once, and it will long vibrate once per 3 minutes after that.
Attention: The device has a function of memorize by using built-in high-capacity polymer lithium battery. In the first 5 times please charge the battery fully after you have used out the battery. By doing so, you can access the maximum capacity of the battery, reaching the standard working hours.
u Playback
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is playback software in the computer before connecting.
u Setting time
When using the device for the first time, you can reset the time as follows:
1) Create a txt file named “Time. Txt”
2) Edit the file according to the format:
2010.12.12 12:12:12
3) Copy the file to the root of the disk of the camera, then pull the camera out of computer
4) The time will be reset when restart the camera again next time.
Attention: To save the time set for the video, just power off by pressing the remote control, if switch the power on/off button to “off” position directly, the time of the video cannot be saved and it will back to the Default time.
l Attention
1. If it’s lack of power while recording, the device will long vibrate 2 times, and the file will be saved before the device turns off.
2. When taking video continually, the system will automatically recreate a new video file after each operation.
3. Under a bright environment, keeps camera vertical, stable and keeps certain distance from the scene you want to record in order to achieve a best effect.
4. Connect to computer: the time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable in good work order, then connect again.
- Previous: User Manual of Hat Camera
- Next: User Manual of Bluetooth MP3 Cap Camera
