l  Product  Accessories
● Mini DV camera     ● USB cable     ● User manual CD      ● A clip
● A lanyard           ● A buckle        
l  Picture & Buttons

1. Function Button (Power On / Off / Photo / Video / Save)     2. Indicator Light     3. Reset            4. MIC           5. Camera         6. Lanyard Hole      7. USB Port           8 .SD Card Slot 
 
l  Technical Data
This item is an ultra-small mini camera launched for meeting the demand of market, with advanced high definition video, photo function. It is of simple operation, elegant design, useful and portable.
1)     Main function: recording video and audio, taking photo, USB drive,
2)     Video format: AVI, 640*480 resolution
3)     Picture format: JPEG, 1280*1024 resolution
4)     Eternal memory: SD /TF card, 2GB-8GB  Max32GB
5)     USB interface: 2.0（Hs）
6)     Charging time: 1hours
7)     Battery use time: built-in Li battery, 40minutes
8)     Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ Vista or above (Windows98 is excepted)
l  Operation
u  Insert card
Before using this device please insert Micro SD card or TF card. When inserting the card, please let the side with metal of the card face the side with fake screen of the device.
Note: Start without inserting a card, red light flash quickly
u  Switch on
Under power off mode, press the function button, three seconds later, the red light keeps on; the camera comes to standby mode.
Note: under standby mode, the device will power off without any operation in 1 minute
u  Taking photo
Under standby mode, short press function button once, red light flashes once, a photo is taken and saved at the same time automatically. The camera is back to standby mode. Repeat the above operation for more photos.
u  Recording video and audio
Under standby mode, long press function button for three seconds, red light keeps flashing slowly, the camera comes into recording mode, short press the function button once , red light keeps on, indicating a video file is saved and the camera is back to standby mode.
Note: during the continuous recording, the device will save a video file each 3 minutes automatically.
u  Switch off
Under standby mode, long press the function button for 5 seconds, red light is off, indicating the camera is at power off mode. Or under any mode, insert the clip into the reset hole to power off.
Note: reset while recording, the current video will not be saved.
u  Reset
Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, and then the device is at power off mode.
Note: Please press slightly when reset the device, otherwise the components will be damaged.
u  Charging
Connect the camera to computer via USB cable and charge it. The red light keeps on while being charged. The red light turns off when the camera is fully charged.
If the device is of low electricity, red light flashes twice quickly and then the device shut down, but the current file will be saved before shutting down..
u  Playback video
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is the playback software in the computer before connecting.
Note: there is no response when connect the camera to computer via USB , please reset with the clip and then repeat the previous operation.
u  Setting time
There is a function which show the video recorder time (year-month-day hour: minute: second) will be recorded in the recorded files, and will be shown when playback. Please set the time correctly as follows:
1)     Insert the user manual CD into the computer
2)     Open the file: update time tool V2.0
3)     Click the file, then the time of the mini DV camera will be the same as your computer
4)     If you want to change the time, just adjust the time of computer
 
 
l  Attention
1)     Under the standby mode, the device will power off without any operation in 1 minute
2)     The device is in the low power when recording; the system will save the video data first, and then shut down automatically.
3)     When taking video continually, the system will automatically generate a new video file after each operation.   
4)     In the adequate light environment, keep the DV vertical and stable, you can get best video and images within a certain distance.
5)     Connecting computer: while connecting, do not do any operation, if the device cannot be recognized by computer, please check the computer system, driver, USB port, USB cable, and then reconnect.
6)     As the devise has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max recording time perfectly.
 
y;mso�"tl
��@`�lfo5'>1)     Please check if the device has enough power and charge it when it cannot power on.
2)     If the memory capacity is not enough, the device saves the current files first then power off automatically.
3)     Connected to the computer: computer configuration or system according to differences in recognition time will be slightly different hardware, if you can not recognize, make sure your operating system, driver, USB interface cable are all normal, and then re-connect.
4)     Under adequate light environment, you can get the best video and images within a certain distance.
5)     As the device has built-in high-capacity polymer lithium battery, so it has no memory effect. We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.