1、Accessory：
 ● watch camera              ● usb cable             ●user manual CD            
2、Button：

1、camera         2、mode switch          3、blue light        4、time adjustment
5、Red light       6、power on/off/ function          7、IR light          8、Mic
9、USB port             10、TF slot           11、program updated button     12、Battery port
Technical Data
1） Main function: Recording video，taking photo，taking audio alone，webcam，IR night vision，watch，USB drive.
2）Video format：AVI, 1280*720
3）Photo format：JPEG, 1600*1200
4） Audio format：WAV
5）Memory：2GB-8GB，Max 32GB
6)  USB interface: 2.0（Hs）
7)  Charging time: about 4-5 hours
8)  Battery use time: built-in Li battery, about 3-4 hours
9)  Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/vista or above (Windows98 is excepted) .
u Operation
◆ Insert card：
Under power-off mode, please open the watch bottom cap towards anti-clockwise, disassemble the battery correctly, open the TF slot cover and insert the TF card into it and close the cover, then install the battery correctly, screw the watch bottom cap towards clockwise, now the camera is ready.
◆ Switch on
Under the power off mode, long press power on/ off / function button, blue light keeps on, now it enters into video standby mode.
Attention:
1）、Switch it on without memory card, the machine will be off automatically after red light and blue light blink for 4 times simultaneously.
2）、Under the standby mode, the machine will be off automatically if no any operation within 3 minutes.
◆  Recording video：
Under the video standby mode, short press power on/off/function button, blue light will be off after blinking 3 times, then it begins to record video; Under the continued recording video mode, short press power on/off/function button, blue light keeps on, The video file is saved and the device is back to standby mode. Shortly press the same button again to restart recording
Attention:
1.    Under the continuous recording, to confirm file’s safety. System will automatically save the files every 30 minutes.
2. In order to save the power, the indicator light keeps off while recording and it is still recording at that time.
u  Recording audio alone
Under the video standby mode, short press mode switch button one time, then red light keeps on, it enters into taking audio alone standby mode; short press power on/off /function button, then red light will be off after blinking 3 times, it is taking audio; Short press the same button again, the red light keeps on, then it stop taking audio and save the file, the machine goes back to take audio alone standby mode.
Attention: to ensure a good taking audio effect, please don’t hold off the MIC hole.
◆ Taking photo
Under video standby mode, shortly press Mode switch button twice, red light and blue light keeps on. It comes into photo taking standby mode. Shortly press power-on/off/function button, blue light will blink once. One photo will be taken and saved, then back into standby mode.
◆ IR light
IR light will be open automatically in low light, not need to open it by manual.
 After IR light opened, when there is no exposure and infrared, and in the normal light environment, IR light will be closed automatically to save electricity.
◆ Charging
Under power-off mode, connect camera to computer or charger via USB cable. Red light keeps on while being charged. When red light turns off and blue light keeps on, it shows the camera is fully charged. ( Another way: disassemble the battery to charge it via the adapter)
Attention: This watch movement battery is made up of button battery with circularly charging, not need to change the battery. Just charge it when the watch needle stopped.
 
u  Playback video
After video/audio recording and taking photo, under Power off mode, then connect device to the watch via USB cable, then connect to the computer, click the removable disk and play back video on computer. Please make sure there is a playback software in the computer before connecting. ( Another way: Using the card reader to read the memory card of the watch. )
◆ Switch off
 Under any standby mode, long press Power on/off /function button, the light will be off and then it powers off.
◆ Webcam
The device can be used as web camera, follow below steps:
Under power off mode, connect to the computer via usb cable. At this time, long press power on/off/ function button, a standard web camera will appear on the computer for your use.
Attention: After USB disk exited, now it enters into webcam mode, not need to install any drive.
◆ Setting time
It can display the recording date and time on the video, you can set it as follows:
1)     Create a file named “time” edit it according to the format “2012-09-22_09-23-01”
2)     Copy the file to the root of the disk of the camera.
3)     When starting the camera again next time, the time will be reset and updated.
u  Attention
1)    When taking video continually, the system will automatically generate a new video    file after each operation. 
2)    Please check whether it is low power, if it cannot turn on.
3) In order to obtain better night vision effect, According to video environment, you could choose to turn on the IR light to make good night vision. Besides the machine is attached with IR lens and 3 IR lights.
4)     Connect to computer: The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable are in good order. Then connect again.
5)     As the device has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.
6)     When the memory card is full, the camera will be off automatically after saving the file. Please spare some storage capacity if need continue to use the camera.