1、Accessories：
● Baby Unit         ●Parent Unit         ●5V DC Adapters*2pcs  
● CD Manual
2、Pictures & Buttons          


Parent Unit Key Names

Menu/Ok	To Enter the Menu Setting,Short Press to confirm selected option inside menu
Power	In standby Mode,Pressing power Key 5s to turn on/off
Vol+	Increase output Volume To Scroll UP menu options
Vol-	Decrease output Volume To Scroll down menu options
Talk	Press and hold to talk back to baby unit
Music	Short Press to play/Stop Music
Night Light	On/Off/Auto function

    














Baby Unit Key Names

Rechargeable Dock	Parent can charge here
Power	In standby Mode,Pressing power Key 5s to turn on/off
Page/Register	Page:Short press page key to call parent unit Register:Long press page key 7s to register
Vol+/UP	Increase output lullaby volume or speak volume To scroll UP menu options
Vol-	Decrease output lullaby volume or speak volume To scroll Down menu options
Music	Play/Stop Music
Night light	On/Off/Auto function
Menu/OK	Menu/OK setting
Return	Short press to back menu

                                      














3、Product Features
Main Functions：
.Two-way voice talk function
·Night Light on/off/Auto Function
·5 Lullabies
·Temperature indication function
·5 Steps level talk Volume adjust
·Temperature alert on/off function
·Voice Control,if the baby has a movement,the receiver will prompt that.
主要功能主要功能：
·夜灯开启/关闭自动功能
·5摇篮曲
·温度显示功能
·5级别音量调整
·温度报警功能
·声控功能，若宝宝有异动，接收机就会有提示。
·双方通话功能
主要功能：
·夜灯开启/关闭自动功能
·5摇篮曲
·温度显示功能
·5级别音量调整
·温度报警功能
·声控功能，若宝宝有异动，接收机就会有提示。
·双方通话功能
主要功能
 
4、             Operation Manual
Power On;
①    Under the power off mode,Plugging in a battery or DV 5V into baby Unit.Long press 【Power】 key 5s to turn on.The baby unit will begin to start.
    Plugging in a 2.4V battery into parent unit,Long press the 【Power】 key 5s to turn on.
Parent Unit will begin to search for a Baby unit. That has been registered to a baby,,the display will show【SRCH】.Once the Baby unit is found,the parent unit will enter monitor mode.The baby and parent Unit will show Icon.Icon shows【30℃】.It depend the Temperature room.
②    Under power off mode,when the device is linked to a power source by charger,The device will power on automatically.
③    When the device is not link to one power source,please make sure whether the battery have power.
 
Night Vision Function：
Short press【NL】key on Baby unit or Parent Unit to turn on/off/Auto mode.
If the night LED is on,the “Night Light” icon will be showed both the baby unit and parent unit.
If the night LED is off,the “Night Light” icon will not be showed both the baby unit and parent unit.
If setting to Auto function,the “VOX”icon will be on the both baby unit and parent unit,the night light LED will control by the vox.If the vox is higher than MIC setting,the night light LCD will be on.
Under the Auto mode of night light,Press the【NL】 key again to turn off night light.
 
Talk Back(Parent Unit):
During monitor mode,Pressing and holding the 【TALK】key of parent unit,it will go into the talk back mode.Now the Speaker of parent will be closed temporarily.Releasing the 【TALK】key will go back into the monitor mode,the monitor microphone will be muted and the monitor unit can continue monitoring the baby unit.
Under the mode of monitor or Talk,the speaker volume cab be adjusted by pressing【UP/VOL+】key or【Down/VOL-】key.There are 5 steps digital volume control for monitor unit and 5steps digital volume control for baby unit/the parent unit.
 
Play Music-Lullabies
Under standby mode/monitor mode,press the【music】key on baby unit or parent unit to paly music.and then press【up/VOL+】key or【down/VOL-】key to adjust music volume.Press the【Music】key again to stop the music playing.
Also,you can enter talk-back mode to comfort your baby by pressing and holding【talk】key,meanwhile,the lullaby will be stopped and your baby will listen to your voice.
 
Mode selection(Parent unit and Baby unit)
1.      Microphone sensitivity setting:
You can set the sound sensitivity of the baby unit to the desired level.When setting to the maximum sensitivity level all sounds(including your baby’s breathing,when loud enough)can be heard on the parent unit.You can only change the microphone sensitivity if the connection between the bay unit and the parent unit is established.
In standby mode:
Press【menu】key enter main menu.The LCD will show the Word”SETUP”
Press【Menu/OK】key to confirm(parent unit need this step),LCD will show the word”SENS”
Press【UP/VOL+】key or【Down/VOL-】key to select “SENS”option
Press【Menu/ok】key again.
Press【up/Vol+】key or【Down/Vol-】key to select 1-Level to 4-Level.
Press【menu/ok】to confirm
1Level=Minimum Level/Lowest sensitivity
4Level=Maximum Level/Highest sensitivity
Note:
When the sensitivity level of the baby unit is set to a high level,the unit will consume power because it is in continuous transmission mode.
2.Music Setting
In standby Mode
Press【menu】key main menu.
Press【menu/ok】key to confirm(parent unit need this step.
Press【up/VOL+】key or【down/VOL-】key to select”SONG”option.
Press【Menu/OK】key
Press【up/VOL+key or【down/VOL-】key to select music from ”SONG1”to”SONG5”
Press【menu/ok】key enter
 
2.      Temperature Mode Setting:
Temperature format setting：
In standby Mode:
Press【Menu/ok】key main menu.
Press【menu/ok】key to confirm(parent unit need this step).
Press【up/Vol+】key or【Down/Vol-】key to select “TEP”option
Press【Menu/ok】key to confirm
Press【up/Vol+】key or【Down/Vol-】key to select “CE_FA”.
Press【Menu/ok】key to enter.
Press【up/Vol+】key or【Down/Vol-】key to select “CELSI”or”FAHRE”
Press【Menu/ok】key to confirm.
    Temperature alert on/off setting:
In Standby Mode
Press【Menu/ok】key main menu.
Press【menu/ok】key to confirm(parent unit need this step).
Press【up/Vol+】key or【Down/Vol-】key to select “TEP”option
Press【Menu/ok】key to confirm
Press【up/Vol+】key or【Down/Vol-】key to select “ALERT”.
Press【Menu/ok】key to enter.
Press【Vol+】key or【Vol-】key to select “On”or”Off”.
Press【menu/ok】key to enable or disable the setting of temperature alert tone.
Temperature alert(monitor unit)
If room temperature of the baby is above the higher check point or below the lower check point,warming tone can be heard from the speaker and it is continuance 45 seconds.Meanwhile,the warming tone can be heard from the speaker and it is continuance 10 seconds every 5 munites.
When warming tone is sounded,pressing【down/Vol-】key 3 seconds to stop alert.In talk back mode,room temperature of the baby is out of range with a tone indication every 10 seconds on the parent.
Temperature rang setting             
The temperature allowing range of the baby unit at the room.
In standby mode;
Press【Menu/ok】key main menu.
Press【menu/ok】key to confirm(parent unit need this step).
Press【up/Vol+】key or【Down/Vol-】key to select “TEP”option
Press【Menu/ok】key
Press【up/Vol+】key or【Down/Vol-】key to select “RANG”
Press【Menu/ok】key enter option.
Press【up/Vol+】key or【Down/Vol-】key to select “TEPHI”or”TEPLO”.
Press【up/Vol+】key or【Down/Vol-】key to adjust temperature.
For example;
If you set the (TEPHI) 35℃,(TEPLO) 20℃.When the temperature is over 35℃ or below 20℃,warming tone can be heard from the speaker of parent unit.
Not:
If the room temperature is above the higher check point,the parent LCD will show “H”massage and it will flash.
If the room temperature is below the lower check point,the parent LCD will show”L”message and it will flash.
 
3.Out of rang warning
When a parent is being Power-Up and it is too far away from a baby station,an out of range warning tone can be heard from the speaker.The antenna icon 【SRCH】 will flash on the display.
4.Page Function
5.Please Note:
1.Low battery warning:When the DC 5V power of baby is not detect,LCD in the baby will display the battery icon.And it there exist parent that has connected the baby,LCD in the parent will display the baby battery icon.
2.That haven’t built in lithium battery on baby unit.It need to plug in AAA dry battery or DV 5V into Baby unit.If the AAA battery is not one rechargeable battery,For prevent danger, Please don’t connect the battery to power.
3.Effective Monitoring distance:If the device can’t work smoothly, the LCD of parent unit will show the icon【SRCH】.Please make sure whether the parent unit and baby unit is in the Effective Monitoring distance.