◆ Accessory：
● camera                  ● usb cable                 ● user manual CD
● Clip
◆ Picture & Button

1、Power on/off/video     2、Camera     3、Night vision light      4、TF card slot                   5、Reset              6、USB port           7、lighter switch         8、Indicator light                     9、Night vision light switch
◆ Technical Data
This camera is the first design with real lighter, hd digital video, webcam and vibrate indication. It is slim & practical with easy operation. It is very popular and widely used in fields of home security, education, life, etc.
1)  Main functions: recording video and audio at the same time, web camera, night vision function, USB drive.
2)  Video format: AVI, 1280*720 resolutions
3)  External memory: 2GB-8GB
4)  USB interface: 2.0（Hs）
5)  Charging time: about 2-3 hours
6)  Using time: about 1.5 hours
7) Recommend player: Kmplayer、Mplayer, etc support multi-format media player.
8)  Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/vista or above (Windows98 is excepted).
u Operation
u  Insert card
Please insert Micro SD/ TF card before using the camera; If switch it on without memory card, blue light will blinks for 10 seconds before The camera will be off automatically.
u  Switch on
Under the power off mode, long press the power-on/off/video button, blue light and red light keeps on simultaneously, the camera will also vibrate then stop. The System initialization finished, red light keeps off while blue light keeps on, now it enters into standby mode.
Attention: Under standby mode, the camera will be off automatically if no any operation within 3 minutes.
u  Recording video：
Under the standby mode, short press power on/off/video button, the camera vibrates twice, blue light will be off after blinking 2 times, then it begins to record video;
 Short press power on/off/video button, the camera vibrates for 3 time, blue light keeps on, The video file is saved and the device is back to standby mode.
 
Attention:
1.    Under the continuous recording, the camera will automatically save the files every 3 minutes.
u  Night vision light
Under the video mode, if need night vision light in darkness, press night vision light on/off button, night vision function is opened; In bright environment Press switch the same button again, night vision light is off, night vision function is closed for saving electricity.
u  Webcam
The device can be used as web camera. Install driver software:"STK03N.exe" in the user manual CD before use. Then connect it to the computer via usb cable under power on mode. At this time, the computer will appear a standard web camera to use.
Attention: Owing to there is no automatic discharge function by this drive, the system will discharge drive as default, when install the drive even-number. At the same time some drive files will be deleted and PC camera can’t be used. In this case reinstall the drive to work normally.
u  Reset 
u  Insert the pin into the RESET hole to restart the device once it does not work normally under incorrect operations. Gently operate tin slip, now the machine is under power off mode. While resetting, please control your strength, gently operate tin slip, in order not to destroy the equipment.
u  Attention: If reset it directly, files won’t be saved.
u  Switch off
 Under standby mode, long press Power on/off /video button, the camera will vibrate twice, red light and blue light will be off after blinking 3 times and then it powers off.
 
◆ Charging
Connect camera to computer via USB cable. Red light keeps blinking while being charged. When red light turns off, it shows the camera is fully charged.
Attention:
If in low electricity, blue light will blink quickly for 3 seconds, then the camera will save the file and power off. Just charge it if need continuous using this camera.
u Playback video
Under power off mode, connect device to the computer directly or via USB cable, click the removable disk and play back video on computer.
Attention:
1）Please make sure there is the playback software in the computer before connecting.
2）When connect the device to computer to read the data, the camera will vibrate for one time.
u  Setting time
It can display the recording date and time on the video and photo, you can set it as follows:
1)     Insert the user manual CD, then click the setting time software in the CD: “Setting time V2.0”.
2)     The time display of the video will be the same as computer time.
If need change the time of video, just change the computer time.
◆ Attention:
1)     If cannot switch on: Please check it is no electricity then charge it; Or reset it to power off then restart it.
2)     When it is recording the video, if it is in low electricity, blue light will blink quickly for 3 seconds, the camera will save the video file before power off.
3)     Connect to computer: The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable are in good order. Then connect again.
4) Under a bright environment, keep the camera vertical, stable and keep certain distance from the scene you want to record in order to achieve a best effect .
As the device has built-in high-capacity polymer Nokia lithium battery, so it has no memory effect, you can charge it if needed. We advise in the first 5 times of usage, charge the battery fully after
 5).the battery is out of use, so that the battery can work with its max working hours perfectly. To make the maximization of power storage, Please keep charging it for 30 minutes to 60 minutes after the charger indicator indicate it is full.